|
|
|
|
|
|
|
K-2 |
P-1 |
EC-2TC |
EC-2RM |
CP-1 |
|
|
| |
|
| |
Interface external driver for the K-2 Interlock. Encoder not included. |
|
|
|
|
| |
|
| |
The Cine Sync® EC-2 TC Footage Frame Counter is a universal footage/frame, time/frame counter that displays footage in 16mm, 35mm, total frames and time at 24, 25 and 30 frames/second.
|
|
|
 |
COUNT SPEED: Counts up to 500 fps. |
|
BELOW ZERO REVERSE COUNT: Displayed in negative numbers. |
|
INTERNAL MEMORY: Holds count after turn-off. |
|
SPEED: Displays film speed to 1/10 fps. |
|
AUTOMATIC ZERO STOP: Stops your system at zero. |
|
FRAME BLANKING: Eliminates distracting "flicker" above 20 fps. |
|
CONVERSION: Display converts between Footage/Frames in 16 and 35mm Total Frames Minutes/Seconds/Frames at 24, 30, 25 fps Footage frames are displayed in the user bits of the time code output. This code runs up and down at 24 fps. The time code out is a constant 30 fps forward code so any reader will read it. |
|
|
|
|
|
|
|
|
|
SIZE: 1.75" x 6" x 5" |
|
WEIGHT: 1.2 lbs. |
|
OUTPUTS: Optically isolated zero stop switch at 24 V at 100 mA. Time Code Out. Differential 1 v. Running at 30 fps. +5 v encoder power. |
|
INPUTS: Bi-phase 5 v logic. Rates include: 0.5, 1, 2 ,4, 5, 8, 10, 20, 25, 32, 40, 50, 80, 100, 160 pulses per frame. |
|
POWER: 9-24 V at 170 ma or 5 V (as supplied from the Cine Sync® K-2 Interlock) |
|
REMOTES: Hold and reset. Low resets and holds count. |
|
|
|
|
|
|
|
|
| |
|
| |
The Cine Sync® EC-2 RM Studio Footage Rack Mount Counter. Rackmount counter designed for film dubbing and screening rooms. Directly drives the TC-Maxi Studio Time Code Readers, displaying footage, speed, runtime and time code. |
|
|
|
DISPLAY: Film Speed, Footage and Frames |
|
ZERO STOP: generates a stop pulse at zero. |
|
MEMORY: Remembers last count when turned off. |
|
FRAME BLANKING: Unused hour digits and frames above 20 fps. |
|
Automatic zero re-set from the projector changeover or total runtime footage. |
|
CONTROL: The input from the internal counter or an external time code source. |
|
REMOTE: Reset, hold, A/B projector, input, time code/counter, time code/userbits and auto reset. |
|
NEGATIVE COUNT: Shows counts below zero as -1, -2, -3, etc. |
|
|
|
|
|
|
|
SIZE: 19" x 1.75" rack mount |
|
WEIGHT: 5 lbs. |
|
INPUTS: A and B biphase 5v logic; Time Code In Remote function control. |
|
PULSE RATES: .5, 1, 2, 4, 5, 8, 10, 20, 25, 32, 40, 50, 80, 100, 160 pulses per frame. |
|
OUTPUTS: Footage Counter time code; TC-Maxi Interface; Optically isolated zero stop switch 24v at 100 ma; Time Code out differential 1v running at 30 fps; 5v encoder power. |
|
POWER: 12v to 18v at 2 amps. |
|
|
|
|
|
|
|
|
| |
|
| |
Cine Sync® CP-1 Footage/Frame Counter. The CP-1 is a small footage counter that can replace mechanical counters on editing machines. The CP-1 is an electronic counter that makes no noise while running.
|
|
|
|
External Hold to inhibit count when transports are not engaged. |
|
Battery backed up memory when power is off. |
|
Stop can be switch activated for editing tables for zero stop. |
|
Switch selectable pulse rates work with most standard film machines. |
|
Displays 35mm footage and frames. Can be configured for 16mm. 0.3" high LED display with leading zero suppression. |
|
|
|
|
|
|
|
|
SIZE: 3.25" x 4.6" x 1.25" Size: PC board - 1.25" x 5.25" excluding switch. Metal case optional. |
|
INPUT: Bi-phase 5 volt logic. Rates include 1, 2, 2.5, 4, 5, 8, 10, 16, 25, 40, 50, and 80 pulses per frame. |
|
POWER: Input +9 to +24 volts at 170 ma. |
|
EXTERNAL: +5 or 0 volt logic for remote hold input. |
|
OUTPUT: +5 volts for encoder power. +5 volt logic at 100 ma for stop. |
|
|
|
|
|
|
|
|
|
|
|
|
© 2007 J.A.W. Web Creations. All Rights Reserved.
© 2007 Denecke, Inc. All Rights Reserved.
PRIVACY POLICY | SITE MAP |
|
|
|
|
