TS-3

Reads and displays SMPTE / EBU time code for film and video production. “Clap Activated” display. Internal Syncbox Time Code Generator. TCXO crystal. Flat back. Removable plate for camera logs. Runs on six “AA” batteries.

$ 1295

TS-3EL

Reads and displays SMPTE / EBU time code for film and video production. “Clap Activated” display. Internal Syncbox Time Code Generator. TCXO crystal. Flat back. Removable plate for camera logs. EL backlit display. Runs on six “AA” batteries.

$ 1545

TS-C

Compact full featured smart slate. Reads and displays SMPTE/EUB time code. Ideal for documentary work, insert shots, or EFP style shooting. TCXO crystal and back light are standard. Runs on six “AA” batteries. Compatible with Aaton serial communication. Display intensity variable in 12 steps.

$ 1300

EL Option

Backlight display option for TS-2(SB). Lights up scene, take, and production section of face plate.

$ 350

Upgrade

Customer’s original TS-1 & SB-2 built together to form TS-2(SB) unit.

$ 450

TC-1

Reshapes time code. Generates 60 Hz sync. Speed 1/25 to 50x.

$ 425

TC-JR

Battery operated, stand alone, jam syncable reader. Shows frame rate and take number. Also has printer output / computer interface and a backlit display. GPS compatible.

$ 325

TC Maxi

Studio Time Code Readers. Perfect for under screen time code display in film and video dubbing rooms. Features variable intensity control. Four inch LED.

 Three Sizes:

TC Maxi / 4 - 4 digit reader

$ 1050

TC Maxi / 6 - 6 digit reader

$ 1250

TC Maxi / 8 - 8 digit reader

$ 1450

External dimmer / interface for the TC-Maxi

$ 200

GR-1

Master Clock Time Code Reader / Generator. TCXO crystal. Battery Powered backlit display. 23.976 HD compatible.

$ 1095

SB-3 NEW!

Syncbox Time Code Generator plus Word Clock. TCXO crystal. 23.976 HD compatible.

$ 550

SB-T

Trilevel Syncbox.  Generates trilevel sync in all 1080 & 720 formats, composite PAL & NTSC, as well as all standard time code rates.

$ 1050

LEMO Option:

Optional LEMO connector for SB-T

 $ 50

AD-20

Battery operated microphone preamp coupled with a low noise 20 bit ADC. 44.1 or 48 kHz

$ 325

PS-1A

Low noise, 48v Phantom Microphone Power Supply. Uses one 9v battery.

$ 135

PS-2

Dual channel 48v Phantom Microphone Power Supply. No pad switch. Uses one 9v battery. Also available as 12v phantom power.

$ 150

PS-T

Low noise, regulated 12v T-Power Microphone Power Supply. Uses one 9v battery.

$ 135

TB-1

TalkBack System for communication between Boom Operators and the Mixer. Full duplex TalkBack between all stations. Uses one 9v battery per end.

$ 175
Per End

Belt Clip

Fits PS-1a, PS-2, PS-T, TB-1, and TC-JR.

$ 7

EC-2TC

Counter provides foot / frame information. Generates time code for remote displays.

$ 1175

EC-2RM

Rack Mount Counter with TC-Maxi driver and remote select / reset.

$ 1875

CP-1

Footage Frame Counter counts 35mm footage. Features an external stop.

$ 275

CA-1 (Transmitter) / CA-2 (Receiver) / CA-6(Hard Wire) / CA-7(Video) / CB-1*(Audio In) / CB-4*(Monitor)

$  30

CA-3 (TC Output) / CA-4(Sync) / CA-5(Jam Sync) / CA-5¼(Jam Sync ¼") / CB-2*(Nagra In)

$  50

*for use with TalkBack System

T-Shirt

Black Denecke T-shirt with “Father Time” logo on left front and TS-3 slate on back. Available in mens and ladies styles.

$ 12

Service  & Repair

Rate per hour (one hour minimum)

$ 95

Rush Repair

Rate per hour (one hour minimum)

$ 150