Denecke, Inc. - Home of The Industry Standard For Electronic Time Code Slates

TC-1

TC-JR

TC-MAXI

ST-1

The Dcode TC-1 Time Code Reader opens the world of time code to film editing at a fraction of the cost of other systems. Using time coded film dailies, editors working directly with film can use the TC-1 to assist them in syncing, making high speed searches, logging, and keeping accurate time-date records of the actual production.

The TC-1 reads SMPTE and EBU time code from VTRs, videocassette recorders, film editing machines, and film synchronizers from 1/50 to 50 times speed in both forward and reverse. For transferring 1/4" tape to mag film it cleans up (reshapes) time code while generating 60Hz sync pulse from either 24 or 30fps time code. Perfect for film and television production companies, transfer houses, and music studios.

	Reads SMPTE/EBU time code		Signal Status display
	Displays time code in hours, minutes, seconds, and frames		Film resolving 60Hz from both 24 and 30fps
	Freeze the display instantly by pressing the HOLD button		Reshaped code for copying is accessible through the rear output connector

	SIZE: 6" x 5" x 1.625"		INPUT: -35 to +35dB at 50K ohm
	WEIGHT: 1.5 lbs.		SYNC: 60Hz sine wave at 1v
	OUTPUT: 1v square wave at 2K ohm		POWER: 7 - 24v, AC or DC at 180 Ma

The TC-JR is a self contained, battery operated Time Code Reader. It is designed to keep track of take numbers with the built in take counter, and can be used with an optional printer to create accurate time code logs. Stand alone operation is achieved when the TC-JR is jam set from external code. The incoming frame rate is displayed so you always know what code you are using. The compact, flat package makes it perfect for script logging.

	READS SMPTE/EBU time code and user bits		DISPLAYS time code speed and drop frame status
	JAM SYNCS to external code or the Trimble Scoutmaster		EXTERNAL REMOTE POWER and TC Loop through
	HOLD shows current take number		BACK LIT LCD Display
	PRINTER I/O for logging with take numbers or for a computer serial interface

	SIZE: 3.4" x 5.3" x 1"		WEIGHT: 10 oz
	INPUT: -10db, 50k load 3.5mm Mini Jack		BATTERY PACK: 1 Alkaline 9V Battery
	PRINTER PORT: Serial; up to 9.6k Baud 8,1,N		TRIMBLE SCOUTMASTER input in SMPTE Mode

The TC Maxi Studio Time Code Readers display SMPTE/EBU time code with large four inch LEDs. Units feature well formed numbers and will read longitudinal time code from 1/20 to 50 times speed.

Available in three sizes: 4 digit, 6 digit, 8 digit.

Time Code and TC/User select inputs

Variable intensity 4" LED readout:

8 DIGIT: HRS / MIN / SEC / FRS
6 DIGIT: HRS / MIN / SEC
4 DIGIT: MIN / SEC

Internal intensity control

	TC-Maxi/4 - 16.25" x 6.25", 5 lbs. TC-Maxi/6 - 24.75" x 6.25", 6.5 lbs. TC-Maxi/8 - 32.5" x 6.25", 9 lbs.		Maxi/6 Can also be configured to display MIN:SEC:FRS
	INPUT: -20 to +35dB at 10K, 4 pin male cannon		Maxi/4 Can also be configured to display HRS:MIN or SEC:FRS
	POWER: 7 - 14v, 1.5 amps max.

The Dcode ST-1 is a small, battery operated time code sync stripper and re-shaper. Low level code can be re-shaped and brought up to a 3 volt peak to peak level useful for driving most professional equipment. The high output drive can feed sync or time code over long lines, great for concert recording. The ST-1 features long battery life and a LED indicator which strobes at the sync rate.

	Low Level zero crossing detector		LED blinks at the selected sync rate
	Low output impedance		Low battery drain
	STRIPS: 60 Hz and 50 Hz from 30 fps 60 Hz from 24 fps 50 Hz from 25 fps 59.94 Hz from 29.97 fps

	Size: 4.7" x 2.3" x 1"		Input: -15 dBm up
	Weight: 4.7 oz		Input impedance 51K
	INPUT: -20 to +35db at 10k		Battery Pack: 1 alkaline 9v battery